甘肃省 兰州市 更新

供应激光测距仪

310人浏览
同类商家  1021
¥面议 更新于:2010-09-19 09:17:00
  • 详情

经营年限

15年

310人浏览过

所在地区

甘肃省 兰州市

368人索取联系

综合评分

7.4

0条客户询盘

  • 产品详情
使用说明书OPERATION INSTRUCTIONS 1 、按下“ ACTION/ON ”电源键,打开电源。 1 、 Depress the power button “ ACTION/ON ” to turn the power on. 2 、按 下“ MODE ”模式键,切换选择距离单位 M 米制或 Y 码制。具有动态数据切换功能,即测回某一数据后, 按住 “模式”键,切换单位并自动转换数据并实时显示出来。 2 、 Depress the mode button to change “ Meters ” to “ Yards ” . Dynamic data switching function receive the data, hold down the ¨mode¨ button, switch units and automatically convert data and real-time show. 3 、按下“ ACTION/ON ”执行键 1 次,即可开始测距 1 次,右上角有模拟激光发射的标志在循环闪烁,表示正在发射激光。测回的数据显示在正下方,同时显示目标反射质量的高低指示,共分 5 级,从左到右由 5 个小块组成,小块越多表示反射越强。脱靶时显示“――――” 4 个短横线,表示目标太远无法测回。数据显示会一直保持直到下次操作或者自动断电为止。 3 、 Press the ¨ACTION / ON¨ button one time, and begin Ranging 1, the top-right corner of a simulated laser flashes signs in the loop, said it is launching laser. The data show that measurement is in the bottom, also showed that objective reflection of the level of quality instruction, is divided into five, from left to right by five small components, small reflection that the more the stronger. Distance show ¨----¨ 4 short horizontal line, that goal can not be measured too far back. Data show that will remain until the next operation or the power of automatically. 4 、按住“ ACTION/ON ”执行键不松开,则立即开始进行扫描连续测距,测量数据不断地刷新显示,直到 松开按键为止。 4 、 Hold down the ¨ACTION / ON¨ button non-release, immediately began to scan for location, continuously updated measurements show that up until the release button 5 、当电池快用完时,会在左上角显示一个电池符号,表示应该更换电池了。 5 、 When the battery is running low, in the upper left corner will display a battery symbol, that the battery should be replaced. 6 、在主界面下,电源将在无任何操作的约 30 秒后自动断电。 6 、 In the main interface, power supply will be no operation automatically after about 30 seconds off. 注意事项ATTENTION 直视太阳会造成眼睛性损伤。 1 、 Viewing the sun can cause permanent eye damage. 不要用本产品直接测试太阳。 2 、 Do not view the sun with this Range finder or even with the naked eye. ------------------------------------------------------------------------------------------------------ 技术参数特性TECHNICAL CHARACTERISTICS 1 、光学类 观察放大倍率: 7 倍 Optics Magnification : 7x 物镜直径: 32mm Objective lens : 32mm 出瞳直径: 4mm Exit pupil diameter : 4mm 视 场: 122m / 1000m 或 133yad/1000yad Field of view : 122m / 1000m
供应激光测距仪
为您推荐
发现更多好货
产品推荐
手机版
电脑版
虎易APP
微信版