产品材质: A.C.D.F部位采用尼龙制成,B.E部位采用丁腈橡胶制成
螺纹规格: 公制(Mefric)、德制(PG)、英制(G)
工作温度: 静态:-40℃~+100℃短时可达+120℃,动态:-20℃~+80℃,短时可达+100℃;
颜 色: 黑色、灰色、(特殊颜色可定做)
产品认证: 欧洲环保SGS:SH6134468/CHEM
防护等级: 在规定的卡口范围内,并使用O形密封圈旋紧迫紧头,达到IP68
产品特性: 夹紧爪与密封件特殊之设计,配合迫紧头装配省时便利,夹紧电缆范围大,抗拉力特强,可防水、防尘、防盐、耐酸碱、酒精、油、脂及一般溶剂.
使用方法: LNE-K-EX型塑料电缆防水接头是电缆的配套产品,接头可将电缆锁紧,另一端可接入设备箱体上,也可以根据选用螺纹接入进出口为内螺纹的电动设备上.
Product material: Location A,C,D and F made of PA;Location B and E made of chemigum.
Specification of thread: Metric,PG and G
Working temperature: Static:-40℃~+100℃,instantaneously can be +120℃;Dynamic:-20℃~+80℃,instantaneously can be +100℃
Color: Black and gray (special colors customizable)
Certification acquired: European Environmental Protection Standard SGS:SH6134468/CHEM
Protection classification: Within the specified clamp range,use O-shaped sealing ring and screw tight the pressing fastener, reaching IP68
Property: the special designs for clamping jaw and sealants fitted with the pressing fastener can save both time and energy,promising a wide scope for cable clamping and extremely great stretching resistance.It is water resistant,dust resistant and inactive with salts,acids,alkalis,oils and greases as well as general dissolvent
How to use: LNE-K-EX plactic waterproof cable joints are the fittings for cables.The joints can lock the cables tight.The other end of the joint can be either connected with the housing of equipments or connected with electric equipments with inner threaded access hole as per the thread selected.
型号 Item No. 公制螺纹 Metric thread
卡口范围(mm) Range of bayonet AG 外径(mm) AG outer diameter GL(mm) H1+H2(mm)
包装单位个/包
Packing unit:Units/pack
LNE-K-EX-M12 M12*1.5 3-6.5 12 8 20 100
LNE-K-EX-M14 M14*1.5 4-8 14 8 22 100
LNE-K-EX-M16 M16*1.5 4-8 16 8 22 100
LNE-K-EX-M18 M18*1.5 5-10 18 8 24 100
LNE-K-EX-M18 M18*1.5 12-14 18 8 24 100
LNE-K-EX-M20 M20*1.5 6-12 20 9 27 50
LNE-K-EX-M20 M20*1.5 10-14 20 9 27 50
LNE-K-EX-M22 M22*1.5 10-14 2
