ANDEROL ?3057M
SYNTHETIC COMPRESSOR OIL, ISO 46/68
For more information please refer to the relevant
Material Safety Data Sheet accompanying each
product.
?ANDEROL is a reg. trademark of ANDEROL COMPANY.
This information is furnished without warranty, representation, inducement,
or license of any kind, except that it is accurate to the best of OUR
knowledge or obtained from sources believed by ANDEROL to be
accurate. ANDEROL does not assume any legal responsibility for use of
reliance upon it. Only chemists or chemically qualified lab technicians
should carry out tests. Before using any chemical, read its label and
Material Safety Data Sheet.
GENERAL INFORMATION
ANDEROL 3057M is a PAO-based compressor lubricant that was designed to provide long-term lubrication of both
rotary-vane and oil-flooded screw compressors.
TYPICAL PROPERTIES:
PROPERTY TEST METHOD TYPICAL
RESULTS
ISO Viscosity Grade
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity @ -25°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Pour Point, °C
Flash Point, COC, °C
Total Acid Number, mg KOH/g
Humidity, %
Evaporation, 22 hrs @ 210 °F, %
Demulsibility @ 54 °C, ml oil/water/emulsion (min)
Copper Strip Corrosion 8 hrs @ 100 °C
Four-Ball Wear, 1200 rpm, 75 °C, 40 kg, 1 hr, mm
Foaming Tendency, Sequence I, II, III
Specific Gravity @15.6°C
ASTM D-2422
ASTM - 445
ASTM - 445
ASTM D-445
ASTM D-2270
DIN 51.757
ASTM D-97
ASTM D-92
ASTM D-664
ASTM D-1744
ASTM D-972
ASTM D-1401
ASTM D-130
ASTM D-4172
ASTM D-892
ASTM D -1298
46/68
55.3
8.13
3672
116
0.864
-66
260
0.05
0.02
<1
40/38/2 (15)
1a
0.6
Nil
0.8 5
ANDEROL 3057M
APPLICATIONS
???Recommended for use in compressors such as:
???Oil flooded rotary screw compressors
???Oil flooded rotary vane compressors
???Reciprocating compressors
Nominal operating range for Anderol 3057M is -40°F to 400°F (-40°C to 205°C).
APPROVALS
Tested and approved by Knorr-Bremse AG (Knorr Brake Corporation). Should you have any questions regarding the suitability of
ANDEROL 3057M compressor lubricant for a specific manufacturer's model compressor, please check with your ANDEROL
lubricant supplier or contact Anderol Company.
ADVANTAGES
???Fewer oil changes for reduced maintenance
???Compatible with compressor seals, gaskets, hoses, and air system components
???Resistance to oxidation with reduced compressor varnish and deposits
???Greatly reduces fire and explosion hazard
???Longer service life and greater protection of compressor components
???Lower oil consumption
COMPATIBILITY
ANDEROL synthetic hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and
hoses. No special precautions related to compatibility are required when
安润龙3057M空压机油
