概述
对接套管，主要用于美式电缆分接箱，环网开关柜。为美式630A前、后接头提供线路接口，可连接带电指示器，显示母线电路带电状态。
15KV / 630A docking sleeve, mainly for American cable distribution boxes, ring network switchgear. For the former American 630A, rear connector provides the line interface can be connected live indicator that shows the status of the bus circuit is live.
产品本体采用高品质环氧树脂材料，具有良好的机械性能和电气性能。
Body of the product with high quality epoxy material with good mechanical and electrical properties.
产品主要技术数据
项目
参数
额定电压
额定电流
分钟工频耐压
雷电冲击耐压
直流耐压
电晕起始电压
小时过负荷
短时耐受电流
25KV/ 0.17S 10KV/ 3S
标准包装部件
1.
对接套管本体
2.
清洁纸
3.
硅脂膏
4.
防尘帽（非带电保护）
5.
安装指导说明书
6.
合格证
1. Butt bush body
2. Clean the paper
3. Grease cream
4. dust caps (non-charging protection)
5. Install instructions guide
6. certificate
订货须知
1.
订购电缆附件产品时，须注明产品型号、电压等级、电流等级、所用电缆导体材质、导体截面积，是否配供带电显示装置等。
2.
是否需要提供产品安装。
3.
用户如有特殊要求，请在合同中注明。
1. Order cable accessories product shall indicate the product type, voltage level, current level, the cable conductor material, conductor cross-sectional area, whether or not equipped for live display devices.
2. The need to provide product installation.
3. The user any special requirements, please indicate in the contract.
对接套管
概述
对接套管用于35KV电缆分接箱为35KVT 型电缆接头提供中间连接。
35KV 630A two-side bushing are used to connect two or more 630A deadbreak terminators. Two-side bushing are typically used in a separable splice, or with a bushing extender, to increase the distance from the apparatus front plate to the 600A terminator easing cable training.the two-side bushing maintaining full interchangeability with an manufacturers’ mating component items ,and make sure it have been grounding.
标准包装
1.
对接套管本体
1.bushing well
2.
黑色防尘帽（非绝缘保护帽）
2.covering cap
3.
安装指导说明书
3.installation instruction sheet
4.
产品合格证
4.quality certificate
