Copper alloys 铜 合 金 | S 201 紫铜焊丝 | Sn1 Si0.3Mn0.3 Cu Rem. | Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 机械性能好,抗裂性好。紫铜气焊及氩弧焊用 | ERCu |
S 211硅青铜 | Si3 Mn1 Cu Rem. | Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 机械性能好,铜合金氩弧焊及钢的MIG钎焊用 | ERCuSi-Al |
S 212锡青铜 | Sn5 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-A |
S 213磷青铜焊丝 | Sn8 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-C |
S 214铝青铜焊丝 | Al7.5 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A1 |
S 215铁铝青铜 | Al9 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A2 |
S 221黄铜焊丝 | Cu60 Sn1 Si0.3 Zn Rem. | Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | |
S 221F | Cu60 Sn1 Si 0.3 Zn Rem. | S221 welding rod coated with flux. 外涂焊剂的S221焊丝 | |
S 222铁黄铜 | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | RBCuZn-C |
S 222F | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | S222 welding rod coated with flux. 外涂焊剂的S222焊丝 | RBCuZn-C |
S 223 | Cu59 Sn0.6 Zn Rem. | Melting point is about 900℃. Braze welding of copper, steel and cast iron. 熔点约900℃。铜、钢、铸铁钎焊用 | RBCuZn-A |
S 224 | Cu62 Si0.5 Zn Rem. | Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | |
Copper alloys 铜 合 金 | S 225 | Cu48 Ni10 Zn Rem. | Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys. 熔点约935℃。高强度,钎焊钢、镍及硬质合金用 | RBCuZn-D |
S 225F | Cu48 Ni10 Zn Rem. | S225 welding rod coated with flux. 外涂焊剂的S225焊丝 | RBCuZn-D |
S 226 | Cu60 Sn0.3 Si0.2 Zn Rem. | Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron. 熔点约900℃。黄铜气焊用,也可钎焊铜、钢、铸铁 | |
S 227 | Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem. | Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | RBCuZn-B |
S 229 | Cu55 Ni6 Mn4 Zn余 | Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide. 熔点约920℃。高强度,钎焊钢、镍及硬质合金用 | |
Aluminum alloys 铝 合 金 | S 301 | Al≥99.5 | Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蚀。铝气焊、氩弧焊用 | ER1100 |
S 311 | Si5 Al Rem. | Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys. 抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金 | ER4043 |
S 321 | Mn1.3 Al Rem. | Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用 | |
S 331 | Mg5 Mn0.4 Al Rem. | Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蚀,强度高。铝合金氩弧焊用 | ER5183 |