金属线材成型设备 程控全自动精密打圈机

程控全自动精密打圈机

PROGRAM-CONTROLLED AUTOMATIC

LOOPED MACHINE

适用于钢线、铁线、不锈钢线有色金属线材（圆线、方线、扁线）卷圆、半圆或任意角度（同心角）的圆弧，本机是五金、铁线行业专用设备之一。

只需将铁丝整卷放入铁丝架上，取一头线头穿入打圈机的孔位，按打圈产品规格设置好线周长数值、数量、线速，开启开关打圈机即可全自动运作，控制器采用日本三菱PLC，操作面板采用人机对话界面，界面为中英文（可选）显示，送料系统采用伺服电机送料，切断采用液压系统切线，当完成任务后打圈机会自动停机，电机启动即有产品出，定长精度高，送线速度可自由设定，送料速度可高达40-70米/分钟，当线长精度误差超出0.5mm时，设备自动报警停机，减少不必要的线材损耗，本机只需用一台小功率电机,比油压式和机械式更为省电。

Applicable to
steel wire, wire, stainless steel wire non-ferrous metal wire (circle line,
party line, flat wire) roll round, semicircle or arbitrary Angle (with one
Angle of arc, this machine is) hardware, wire industry one of the special
equipment.

Just put the
wire rolls in wire frame, take a head through the thrum of looped machine
designated a hole, according to the product specification hits a circle line
perimeter set numerical, quantity, line speed, open switch looped machine can
automatic operation, controller from Japan mitsubishi is used PLC, operation
panel man-machine dialog interface, interface is both in Chinese and in English
(optional) display, feeding system adopt servo motor, cut off the feeding
hydraulic system the tangent, when complete after task given looped opportunity
automatic stop, motor start namely have a fixed length products, high
precision, send linear velocity can be set free, feeding speed can be as high
as 40-70 meters per minute, when the line length error precision than 0.5 mm,
equipment automatic alarm downtime, reduce unnecessary wire, this machine is
only loss by a small electric motor, power than hydraulic power and mechanical
more saving.