供应快装（焊接）卫生级不锈钢手动隔膜阀（盖米体）

隔膜阀技术参数： Technical Data of Diaphragm Valve: 较大工作压力：10bar Max Pressure:10bar 驱动方式：手动 Operation Type: Manual operation 较大工作温度：150℃ Max Temperature: 150℃ 适用介质：EPDM-蒸汽 PTFE-水、酒精、油、燃料、蒸汽、中性气体或液体、有机溶剂、酸碱溶液等 Applicable Media: EPDM-Steam PTFE- Water, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and Lye 连接方式：对焊（G/ DIN/ISO） 快装 Connection Joint: Butt-welded Ended（G/ DIN/ISO） Tri-clamp Ended 特点： 1．弹性密封的开闭件，阀体密封堰槽采用弧形设计结构，确保没有内漏； 1. Elastic sealing/ packing and arc weir seal design of valve body insure without leak; 2．流线型的流道，使得阻力减小； 2. Streamline valve design can decrease the friction and resistance of valve; 3．阀体与盖被中间隔膜隔开，使得隔膜上方的阀盖，阀杆等零件不受介质侵蚀； 3. Valve body and bonnet are separated by diaphragms in order to prevent valve parts, such as bonnets and steam from corrasion; 4．隔膜可更换，维护费用低 4. Diaphragms can be changed in order to low the maintenance cost; 5．目测式位置显示开关状态 5. Seeable device can indicate the on-of state; 6．多种表面抛光技术，无死角，在正常位置下无残留。 6. Advanced polishing process insures be sanitary, without dead angle and residue; 7．结构紧凑，适用与狭小的空间。 7. Compact construction is suitable for valve installation with small space; 8．膜片符合DFA及UPS等机构对药品和食品行业规定的安全标准。 8. Diaphragms satisfy all the sanitary standards and conditions of DFA and UPS.