Basic Functions
• The MUT-III can be utilized for all types of vehicle electronic control units (incorporating the
diagnostics function).
• The MUT-III reads each diagnostic code and displays it as a name.
• Using serial communications, the MUT-III reads the RAM data (data list) within the ECU that is
required for servicing, thus enabling the display of both graphs and numeric values converted to
physical quantities. (Only for ECUs that support serial communications.)
• The MUT-III can forcibly drive or forcibly stop the actuators required for servicing. (Only for
ECUs that support serial communications.)
• Using its voltage measuring function, the MUT-III can measure DC voltage ranging from +/-40Ｖ.
• Using its resistance measuring function, the MUT-III can measure resistance ranging from 0 ~
100kOhm.
V.C.I. Function
Fault Diagnosis
The V.C.I. can perform fault diagnosis by receiving
commands from a PC and communicating with a vehicle
ECU.
The buttons on the V.C.I. will not function while it is connected to a PC.
[Start-up Screen]
•The screen to the left will be displayed when the USB
cable is connected to the main unit.
The direction of signal flow between the PC and the V.C.I. will be indicated by an arrow, such as [P->V] or [P<-V].
Measurement Functions: Voltmeter / Ohmmeter
The V.C.I. can read voltage / resistance values that are applied to its trigger port, displaying these numeric
values on its LCD screen.
